Maintaining The Antminer

As was stated in the previous article, If you take care of anything, it will take care of you. I will show you the best way to maintain the Antminer then from there I will illustrate how to take it apart to clean and maintain it. If you have even a remote of common sense, then you know that putting it back together, is a complete reverse of taking it apart.

The first thing to remove the Antminer from service

                          

If it has a case remove the case from the Antminer, and you should get this. Note this is an Antminer S5, but the actual style is exactly the same as the Antminer S3. Also most Antminers have the same components, The case housing, the fan motors, the hashing boards, the cables, the control board, the coils are all similar.

First we are going to remove the fan motor. Only four screws, and the power cable inserted to the board. Pretty easy.

With the fan motor off you can now see and inspect the cooling coils

As you can see, these coils are in desperate need of cleaning, so we must remove all the cables, then all the sides, and finally the hashing-boards with the control board and mount in order to clean the entire coil.

Remove the plate screws and the plate


 

Now remove the cables from the board all cables must be removed.  

                

                        

Take out the control board

You will need to unplug the control board from both sides of the hashing board and remove all the machine screws from the hashing-board which is attached to the coil. Antminer S3 has a heat sink that is in the center, you will need to remove this. Keep the screws all together.

Hashing Boards can be cleaned with mineral oil, or Rubbing alcohol and a good air compressor. Once they are cleaned you can reattach the Hashing Boards, and re-assemble the Antminer in the exact reverse steps that you dis assembled it.

Maintaining the Antminer will allow you to have the maximum efficiency of the mining operation. I hope this article helped you.

Mining Basics for all those that want true Freedom, and bypass this failing system.

I have given you many tips, and knowledge on mining. The reason is I have the experience and based on personal experience I have found that Hash-power is not the only factor here. If you are not running a warehouse, suite, or another place where you have the best way to make good, then you will have to read the reasons my way is the best to get started, and you can make a good living despite what the negative naysayers say.

Let us look at an Antminer S-3 Farm. Two Antminer S3's can be connected to one, Correct, Power supply. This saves on electricity and you must use multi pools to mine multiple coins. Hash-Power is no longer an issue because the multi pools mine the most profitable coin every second anyway and just pay you in the coin you are requesting.

 

 

Once you have your miners set up with each having it's own unique I.P address, then you must choose the right Multi Algo Pool for you. Either Zpool. CA, Yiimpccmier, or countless others that are surfaced. Program at least three different coins that you want to be paid in to your own wallet that you either have on your computer, or mobile device. Every other day, or once a week be sure you exchange your coins through shape-shift, to whatever your base coin is, Either Ether, Dash, Litecoin, or even Bitcoin. I tend to use another because this way only you will know how much you have as it should be.

The below example shows two pools, but it is good to have three. Think about this 3 different coins for each Antminer, Multiplied by 20 Antminers is 60 coins, which means you have 60 streams of income, Trust me, you will see when you are converting to your base coin how quickly it really does add up.

 

Using this graph, you can see that we have a split of mining ScryptJaneNf16 Algorithm, X15 Algorithm, Qubit Algorithm, and Lyra2RE Algorithm. The best way is to have a steady, Multiple stream income that you can see add up when you convert to that coin you are using as your base coin.

I have other tips and tricks, but remember this, The next time someone says to you that you need hash power and mine one coin not divide your hash power, you look at them and simply say, 60 will always be greater than 1.

GPU Mining For 2017

Even though it becomes more and more difficult to mine a coin with a GPU system, and you find yourself at the mersy of those with Mega-Hash-Power, There is a way you can make good with a GPU mining system as an assist. This is using your head and doing what Crypto-Currency was designed to be, Multiple streams of income.

Use one of the Multi Algo pools and you may have to switch based on your algorithm you are using, or maybe the pool is paying out great, just switch what coin you want to be paid in.

POOLPICKER

Head over to Poolpicker.eu

http://poolpicker.eu/

 

You will see a list of pools some of these pools have sister sites, Not listed that pay out either the same or longer, which means more coins. The best strategy here is to pick a lower alt coin, it does not even matter what ALGO you are mining. You are just sending them a message what coin you prefer to be paid in.

As you can see GPU mining will never be dead, it just has to be done a different way that is all. This is for the newcomers that want to start to earn in order to afford better mining hardware. Hopefully this article helps you understand a little. Tomorrow we will discuss using sister sites and how to program a proper bat file.

BITCOIN 101

                BITCOIN 101



    I am making a living on Bitcoin. I am about to reveal how easy it is for those that are not the business type of person. Let us get into the basics.

    The first thing you will need is a wallet. This is the final destination at the end of the week for your accumulated earnings. The one that most recommend is COINBASE, Although there is also Blockchain and XAPO which are also great wallets you can choose whichever one that you want I highly recommend that you explore them all and see what meets your needs and security best. Blockchain allows you to sweep coins from a paper wallet, and XAPO is like the fort Knox of Bitcoin, so it is really up to you what you prefer.

The Next step is to set up the ore mine.   This mine is where you will be withdrawing your weekly pay after you get the ore mine upgraded. Here is how this works. Once you click the above link and register a free account, Go to the deposit address copy and paster that address into the faucets, from the list I will provide later, and your earnings will be automatically deposited into your Ore Mine wallet. Once you have the amount of satoshis to upgrade, which should be your first deposit, purchase a mine and upgrade as far as you can. Continue doing faucets and upgrading till you are level 5. now once you will see the amount of daily interest and monthly interest to your deposits will allow you to start withdrawing a weekly income, do not withdraw all coins just the bit coins. For example if you have in your funds: 2.09357896 only withdraw the 2.0 so that the remainder continues to get daily interest.

    Now that you have the basics let us start earning Bitcoins. All you have to do is click on the following links every hour trust me you will see them add up in the faucet box ACCOUNT. Here are the list of the best faucets to earn:


HIGHEST PAYING FAUCETS

DANCE FAUCET

FREEBITCOIN.in

FAUCET AMERICA

FAUCET CANADA

BITCOIN SHEEP

E-PAY ROTATOR


    These are the best there are many more that you can find as well as many worthless ones. My advice if they do not pay 500 or more do not waste your time.

    Deposit them directly into your ore mine this process should effectively take you a couple of weeks before you actually see an income but if you started a  new job today it would take you 2-3 weeks before you saw your first check so actually what is the difference.

I hope this helps if you found this information helpful donate some bitcoins here


 35gMQDGv1Xe9SaqyTM8yMDR9Vy4tGyAWDy

Thanks